AMMO weathering as applied to a F-8 Crusader

Plane model making.. applied for a diorama of course. It is an expensive and very hard hobby..

Anyway, I used AMMO's version of Kursk-like terrain to weather a Academy F-8 Crusader, and yes it certainly does do the trick!

AMMO by Mig weathering on a F-8 Crusader

And here is a close up picture of the completed diorama i am going to post tomorrow around 6PM French time

Preview of the Crusader diorama


Metalic pigments from Uschi van der Rosten

That's a hobby sort of posting. I recently bought Uschi van der Rosten's metalic pigments and well, I used to know Alex before he was Uschi you see and this kind of posts can't do him wrong.

So I spent the whole of last week thinking very loudly that plane modeling was the worst hobby on earth. I mean, scribbling the panels back after the Mr Surfacer, building and inserting a Aires cockpit in 1/72...
So what you see is the scratchbuilt underside of a F-8 Crusader wing. First image is after the Alclad work, not tops mainly because the needle is mostly out of service thanks to my usual rough handling of delicate material.

Alclad II on f-8 crusader engine bay

Second pic is me with some oil paints doing some sort of dark shadows -and mixing them with Uschi's metalic pigments (yeah it somehow worked). Then I found out that the pigments themselves were doing some nice shadows (3d pics). I had to take care of the Chrome one which is just too bluish for my tastes (and the current project). I then realized I could mix those pigments with regular AMMO like modeling ones, especially with blacks or greys..

Uschi van der Rosten metalic pigments applied

4th picture is me using Uschi's trick, ie buffering the surface with a q-tip and miracle! it worked, you have a real high shine on a very tiny surface which here was the top of my wire layers, what I needed actually. Now for smaller q-tips.
Uschi van der Rosten metalic pigments bottles
Just fell i was using the stuff at about 20% of its capacities, but it was enjoyable. the real downside I see with this material is that Uschi didn't put out a wider range of colours. I would have loved a copper or gold tint, not to mention a bright silver -even if my buffering the steel pigments coat, I almost got some silver at one point.

fional weathering of the F-8 Crusader with Uschi van der Rosten metalic pigments


DMN legs, Magic Sculp and Duro for a nextish diorama -horses in 1/35.

1/35 scratchbuilt horses

Red Riding Hood

Here is the new diorama called Red Riding Hood.

Gallery is here

Light effects

Here are some lightnings effects done on a 1/35 tree modelled out of A&B mastic (ideal for that kind of modeling). this is for the soon to be aired Red Riding Hood diorama

Tree 1/35

Baba Yaga 2

Working on the figure, this is a Work in progress and should change for the better -still a lot of trimming work to do

Baba Yaga


My first British diorama! Bleaklow is located between Sheffield and Manchester. I had no idea the terrain was that great when I spent a few time in Manchester by the mid nineties otherwise I would have pay a visit.Bleaklow diorama


The Scottish coast

I thought I would post that In Progress picture of one of my current works.

Happy new year to everybody!

The scottish coast 1/35

The Minoga diorama

Finished last september. It is intended for publication in a magazine that advised me caution, so few pictures of that one.

Gallery here

Minoga diorama