The Russian 1905 PT boat is completed

So that was some three weeks worth of "work" then, the 4 first meters of that small ship are finally completed. I have no real time to feed t-hat blog properly, so here are some of the steps I used in order to build all the accessories. few text, loads of pictures.

So this starts with homemade photoetch. I only had a few bits of brass left -and then my French online mail order is sluggish to get the stuff delivered, so I had to rely a lot on some of the leftovers from previous dioramas I carefuly store. Anyway, I could still do some of the 47 mm Hotchkiss parts as well as air intake stuff etc.

photo etch homemade

First that air intake. I hate building air intakes, this is very difficult because you have to work out a master in plastc and Magic Sculp, then you have to vacuform it (with the heat of a candle!) and then you have to join and fill the two halves..

Air intake scratchbuilt

 

here is a bit of soldering, those are the two supports for the side lights. I don't think i will place them on the boat because their shape somewhat hides the gun, and then I have  a reference picture where those had been removed solder

half dried Magic Sculp, evergreen tubing, breech sculpting and trimming, sanding etc, here are some parts of the Hotchkiss 47mm gun parts of the Hotchkiss 47mm gun

Hotchkiss 47mm gun completed! Hotchkiss 47mm gun

Here are all the parts done! Now it's time for gluing those parts for the 1/35 russain PT boat

And here is the thing.. I will post some better pictures showing it primed soonish!