Happy new year to all of you! I spent some time in front of the computer lately, fixing one thing or three with that very website -notice now how I have been including 4 years worth of archives. Some of those posts are of various quality, but there are some okay tricks to be learned here and there.
Here we go with a big fortification wall. let's first do some more detailed form out of thick plastic
Then let's do the rest of the form out of plastic and plasticine for kids. here is another use of the hairspray I use to weather the boats :) It's of course heavily greased.
With the current weather, the plaster doesn't dry so fast which is a very good thing.. One of the most important tricks to remember with plaster is that *you don't sculpt the same things when the plaster is wet than when it's ultra dry*. The other one is *use different qualities of plaster*
Of course the problem right now is that the plaster was still so fresh that most of my little bits under the corniche went when I unmoulded the form. Whatever, let's use the moments when the plastyer is still very wet to sculpt roughly all the different stones blocks, trimming here and there -and adding again the small blocks under the corniche by just applying some fresh plaster and then cutting them out with an X-Acto.
Notice the buring traces. i have been forgetting the wall on a very hot radiator... The plaster then gets very brittle, you carve really huge when you want to sculpt it.. all the best then.. Look at the final result -the inner bricks were done in a much better quality plaster and the drzawing of different bricks is a lot finer. the point ifs to show some walls of different ages..
You may also notice that stones are getting mroe or less scarteched on the surface, more about that later.
Finally, may I insist about the fact that what i have just been doing is actually quite a simple job? that's not Xtreme modeling or whatever, everybody can do that.
Ah well, time to raise the level a bit :)